|
|
 |
Solid Carbide NC Pointing Drill
 |
|
Point angle : 120 degree, Diameter tolerance: -0.010/-0.015 mm,
Shank Diameter Tolerance: 0/-0.01 mm
Attention: ADPN(F) 30 means 3.0 shank & ADPN(F) 31 means 3.175 shank
D: Cutting Diameter, FL: Flute Length, OAL: Overall Length, d: Shank Diameter
| |
For Non Ferrous &
easy to cut materials
: ADPN series |
For Ferrous &
hard to cut materials
: ADPF series |
| CODE |
D |
FL |
OAL |
d |
| ADPN**-0005 |
0.05 |
0.1 |
38 |
3.0 or 3.175 |
| ADPN**-0006 |
0.06 |
0.1 |
38 |
3.0 or 3.175 |
| ADPN**-0007 |
0.07 |
0.1 |
38 |
3.0 or 3.175 |
| ADPN**-0008 |
0.08 |
0.1 |
38 |
3.0 or 3.175 |
| ADPN**-0009 |
0.09 |
0.1 |
38 |
3.0 or 3.175 |
| ADPN**-0010 |
0.10 |
0.2 |
38 |
3.0 or 3.175 |
| ADPN**-0015 |
0.15 |
0.2 |
38 |
3.0 or 3.175 |
| ADPN**-0020 |
0.20 |
0.4 |
38 |
3.0 or 3.175 |
| ADPN**-0025 |
0.25 |
0.4 |
38 |
3.0 or 3.175 |
| ADPN**-0030 |
0.30 |
0.6 |
38 |
3.0 or 3.175 |
| ADPN**-0035 |
0.35 |
0.6 |
38 |
3.0 or 3.175 |
| ADPN**-0040 |
0.40 |
0.6 |
38 |
3.0 or 3.175 |
| ADPN**-0045 |
0.45 |
0.6 |
38 |
3.0 or 3.175 |
| ADPN**-0050 |
0.50 |
1.0 |
38 |
3.0 or 3.175 |
| ADPN**-0055 |
0.55 |
1.0 |
38 |
3.0 or 3.175 |
| ADPN**-0060 |
0.60 |
1.0 |
38 |
3.0 or 3.175 |
| ADPN**-0065 |
0.65 |
1.0 |
38 |
3.0 or 3.175 |
| ADPN**-0070 |
0.70 |
1.2 |
38 |
3.0 or 3.175 |
| ADPN**-0075 |
0.75 |
1.2 |
38 |
3.0 or 3.175 |
| ADPN**-0080 |
0.80 |
1.2 |
38 |
3.0 or 3.175 |
| ADPN**-0085 |
0.85 |
1.2 |
38 |
3.0 or 3.175 |
| ADPN**-0090 |
0.90 |
1.8 |
38 |
3.0 or 3.175 |
| ADPN**-0095 |
0.95 |
1.8 |
38 |
3.0 or 3.175 |
| ADPN**-0100 |
1.0 |
1.8 |
38 |
3.0 or 3.175 |
| ADPN**-0150 |
1.50 |
2.5 |
38 |
3.0 or 3.175 |
| ADPN**-0200 |
2.0 |
2.5 |
38 |
3.0 or 3.175 |
| ADPN**-0250 |
2.50 |
3.0 |
38 |
3.0 or 3.175 |
| ADPN**-0300 |
3.0 |
3.0 |
38 |
3.0 or 3.175 |
| CODE |
D |
FL |
OAL |
d | |
| CODE |
D |
FL |
OAL |
d |
| ADPF**-0005 |
0.05 |
0.1 |
38 |
3.0 or 3.175 |
| ADPF**-0006 |
0.06 |
0.1 |
38 |
3.0 or 3.175 |
| ADPF**-0007 |
0.07 |
0.1 |
38 |
3.0 or 3.175 |
| ADPF**-0008 |
0.08 |
0.1 |
38 |
3.0 or 3.175 |
| ADPF**-0009 |
0.09 |
0.1 |
38 |
3.0 or 3.175 |
| ADPF**-0010 |
0.10 |
0.2 |
38 |
3.0 or 3.175 |
| ADPF**-0015 |
0.15 |
0.2 |
38 |
3.0 or 3.175 |
| ADPF**-0020 |
0.20 |
0.4 |
38 |
3.0 or 3.175 |
| ADPF**-0025 |
0.25 |
0.4 |
38 |
3.0 or 3.175 |
| ADPF**-0030 |
0.30 |
0.6 |
38 |
3.0 or 3.175 |
| ADPF**-0035 |
0.35 |
0.6 |
38 |
3.0 or 3.175 |
| ADPF**-0040 |
0.40 |
0.6 |
38 |
3.0 or 3.175 |
| ADPF**-0045 |
0.45 |
0.6 |
38 |
3.0 or 3.175 |
| ADPF**-0050 |
0.50 |
1.0 |
38 |
3.0 or 3.175 |
| ADPF**-0055 |
0.55 |
1.0 |
38 |
3.0 or 3.175 |
| ADPF**-0060 |
0.60 |
1.0 |
38 |
3.0 or 3.175 |
| ADPF**-0065 |
0.65 |
1.0 |
38 |
3.0 or 3.175 |
| ADPF**-0070 |
0.70 |
1.2 |
38 |
3.0 or 3.175 |
| ADPF**-0075 |
0.75 |
1.2 |
38 |
3.0 or 3.175 |
| ADPF**-0080 |
0.80 |
1.2 |
38 |
3.0 or 3.175 |
| ADPF**-0085 |
0.85 |
1.2 |
38 |
3.0 or 3.175 |
| ADPF**-0090 |
0.90 |
1.8 |
38 |
3.0 or 3.175 |
| ADPF**-0095 |
0.95 |
1.8 |
38 |
3.0 or 3.175 |
| ADPF**-0100 |
1.0 |
1.8 |
38 |
3.0 or 3.175 |
| ADPF**-0150 |
1.50 |
2.5 |
38 |
3.0 or 3.175 |
| ADPF**-0200 |
2.0 |
2.5 |
38 |
3.0 or 3.175 |
| ADPF**-0250 |
2.50 |
3.0 |
38 |
3.0 or 3.175 |
| ADPF**-0300 |
3.0 |
3.0 |
38 |
3.0 or 3.175 |
| CODE |
D |
FL |
OAL |
d | |
| D: Cutting Diameter, FL: Flute Length, OAL: Overall Length, d: Shank Diameter |
When you are ordering Pointing drills,
Please designate as ADPN(F)30 for 3mm shank type,
and also as ADPN(F)31 for 3.175 shank type.
| |
